Auto Heat and Timer Board Kit

ahtb1.jpg Included with this easy to assemble kit is a PCB that is double sided, etched, with plated thru holes, solder mask and silk-screening. The kit contains a PRE-PROGRAMMED Microchip to control the 4KHZ timer and HEAT CONTROL with ACQUISITION functions. With a Microchip we can update the timer and heat control as needed. Included are all components including heat control up and down switches, manual / auto heat control switch, heat control ON / OFF switch, and easy to follow assembly instructions. Specifications:

  • Built in 4KHZ timer
  • Auto Heat Control via Gilles Muller Software.
  • 35VDC Maximum Bow Voltage.
  • Preprogrammed PIC with flexibility for future upgrades.
  • Pre installed jumper pads to allow DB25 pinout changes to non compatible pinout driver boards.
  • 5.5″ by 1.8″ PCB plugs directly into existing driver boards with on board female DB25 connector OR can be mounted remotely.
  • Terminal blocks for easy hookup to bow and bow power supply.
  • Easy to assemble kit with step by step instructions.

RoHS Compliant

For use with Gilles Muller Foam Wing Cutting Software

ahtb11.jpg ahtb2.jpg ahtb3.jpg ahtb4.jpg

Order: Out of stock.
No restocking date at this time.