HobbyCNCTMCNC for the desktop machinist and hobbyist.

Order:
$22

• Can Rapid Travel at Over 150 Inches per Minute With Our HCNCPRO Driver Board Package Using 127oz-in Stepper Motors at 35VDC!
• 9″ x 24″ x 1″ Cut Area From a 15″ x 34″ Footprint!
• Open Ends Allow Unlimited Stock Length
• Uses Dremel© Type Rotary Tool!
• Vacuum Part Piece Hold-Down!
• Minimum of Parts to Make Building Easier!
• Constructed From Birch Plywood and Easy to Find Materials Using a Drill Press and Table Saw!
• Let Your Computer Cut-Out The Parts You’ve Drawn In CAD!
• Router, Mill, Drill, and Engrave on Your Desktop! PCB Milling Too!
• Connects To The Computers Printer Port!
• Uses Inexpensive Stepper Motors and Controller Board With Easy to Use Software! 60oz-in minimum up to 130oz-in maximum size #23 steppers.
• Supplier List Included!
• Can Be Built For Less Than $550!
• Not a Beginner to Woodworking Project!
• Schematic For UCN5804B Based Driver Included!

Longer travels and larger cutting tools are not recommended!

Pictured below are examples or our CNC Hobby Router PCB milling setup. This setup will allow precision milling (mechanical etching) at feedrates of 20″ per minute or more! Drill at 30+” per minute! Uses vacuum and clamping hold down. Machine can be easily switched back to its original configuration within minutes! Its like two machines in one!

Order:
$22